Expert Tips On How To Polish Stones

The most common method is tumble polishing, but there is likewise vibratory finishing. To efficiently polish rock in a tumbler, the stones need to all be of the same approximate solidity. Rocks are positioned into a toppling barrel with differing degrees of abrasive grit and or water. Depending on the firmness of the rocks, each step in the tumbling process can take place over a number of days.

It is true that not every stone countertop has a sleek surface. There are a number of surfaces that stone (natural stone in particular) can have. Using the correct equipment, you can develop all sorts of finishes on natural stone surfaces. Numerous short articles like this one have actually been blogged about the different stone surfaces. And they have actually discussed the different approaches used like cut surfaces and treatment finishes. One of the treatment finishes is the polished finish. It is this kind of surface that we will focus on in this post. Let’s have a look at how to polish stone surfaces.


There are several kinds of surfaces you can have on any stone surface area. They are measured by their shine( how much they shine). The more shine a stone has, the more reflective it is. For stone polishing pads and more, click here.

  • Flamed/Matte End Up– Near To 0% shine.
  • A rough, stone-like appearance. (can still be “polished” and sealed).
  • Honed Complete– Around 33% sheen.
  • Smoothed out, nearly matte surface look that is ideal for floorings and locations with heavy traffic like stairs and pathways.
  • Satin Complete– Around 66% sheen.
  • Is often referred to as a semi-polished surface, and looks wonderful on any flooring, counter, or shower stall.
  • Polished Finish— Near 100% sheen.
  • With a high gloss, mirror-like appearance, polished finishes really flaunt the stones markings and natural styles.

Action by step rock polishing instructions.


Squeezing one side of the barrel helps when opening. If you use warm water to fill the barrel it will assist to suck on the cover.


Completely clean the stones and barrel by eliminating both ends.

Continue as before using 220 grit this time.It should only be needed to run this grade for about 5-6 days.


Completely clean stones and barrel by removing both end caps, cleaning carefully.

Proceed as before utilizing the same proportions of grit and water however this time usage 400 grit. Please note this phase is very substantial and determines the final polish, it is vital you do not suffice brief.

Enable at least 7 days tumbling. Do not top up with fresh grit as this will re rough up the stones.Each day on this phase imparts a smoother finish as the grit breaks down and gradually smoothes the stones making it far simpler for the next phase.


Really, very thoroughly clean the stones and barrel. It would work to keep one barrel to be used particularly for polishing only, because of the problem of cleaning grits entirely from the sides of the barrel. Extra barrels might be acquired independently. Examine the stones extremely carefully and make certain that they are very smooth. Dispose of any stones that are severely cracked or have actually jagged edges- they can be re-tumbled with your next load.

Repeat actions as before utilizing similar amounts of water but one level tablespoon of cerium oxide rather than grit for a 1 1/2 pound barrel.

Expert Stone Polishing Does Not Require Any Item.

If you’re polishing wood or silver, it’s necessary to use an item to get it totally polished. This is not true when you have your natural stone polished. Whether it’s travertine, marble, or terrazzo, utilizing products like wax or polish can really make the stones even worse. Why? Due to the fact that they’ll end up with a layer of buildup that prevents you from seeing the natural appeal of your stone. Plus, it’ll collect gunk, dirt, and dust much faster.

Polishing Includes A Procedure– Not A Polish.

Next we restore the original surface to your stone, which in fact brightens the whole room thanks to the brand-new shine on your stone. We tighten up the surface of the pores of your stone to ensure that it’s much easier to appropriately tidy and keep your stone in the future.

Leave a Reply

Your email address will not be published. Required fields are marked *